The CarTorque North East Webshop is currently closed and not taking any orders. Please give us a call on 0191 268 1120 for any requirements.

Peron STG1+ (98Ron) Ford Fiesta ST 1.6T

£299.00 (Including VAT)

Fiesta ST Mk7 PERON STG1+ ECU calibration


Fiesta ST Mk7 PERON STG1+ ECU calibration:


Maximum Power whp 168 @ 6000 rpm 203 @ 5125 rpm + 35
Maximum Torque ft/lb 203 @ 3400 rpm 265 @ 2550 rpm + 66

The Fiesta ST 180/200 is a fantastic example of a modern-day turbocharged hot-hatch. With a lively chassis and punchy 1.6T engine, it delivers a genuinely rewarding driving experience. But there’s so much more hidden potential just waiting to be tapped into.

Our brief was to create a car that was faster and more responsive, without affecting everyday drivability. The PERON STG1+ ECU calibration upgrade is designed to work in harmony with the stock 1.6T EcoBoost engine and requires no other upgrades to the vehicle’s hardware, although we highly recommend a PERON High Flow Intake.

Bang for buck, we’re confident that it represents the most cost-effective way of transforming the performance potential of the Fiesta ST.

What’s Included?
– PERON STG1+ (98RON) Tuning
– PERON Gel Badge


The PERON STG1+ ECU calibration produces up to 203whp and 265lb/ft when combined with our recommended hardware.* These figures were achieved using a Dynojet Dyno (24m above sea level), our Demo Fiesta ST Mk7 using 98RON Shell V-Power Nitro fuel and a PERON High Flow Intake System. The ambient air temperature during the test was 19°C

There’s more to a PERON ECU calibration than a set of dyno figures. We focus on making the car more rewarding and, dare we say, fun to drive.

There’s no point in having a power figure to boast about if the car is not enhanced as an overall package. And we think we’ve achieved this. In the real world, this translates to harder acceleration, a stronger midrange and consistent, linear power all the way to the redline. With PERON software, your car can also be quickly and easily put back to stock. Try a PERON STG1+ ECU calibration and you won’t look back!

Fuel Type
– Our STG1+ calibration is designed for 98RON fuel only

Highly Recommended Products
– PERON High Flow Intake System
– PERON Intake Hose
– PERON Cross Over Pipe

*Please note: Installing the STG1+ calibration without the recommended hardware list above may result in failure to make the quoted power / torque figures. Power figures may also vary according to ambient temperature, altitude and quality of fuel used.

We recommend use of our 4-wheel Dyno at the Car Torque garage when installing this type of product. Please contact us on 0191 268 1120 to set up an appointment.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.